Property managers looking after rental units near Eastern Washington University, landlords running small multi-family buildings, and homeowners keeping older homes comfortable through a long regional winter all call us for the same kinds of work. Furnaces that quit overnight, heat pumps that can't keep up when temperatures drop hard, AC units that haven't been touched in years, and ductwork that was never quite right to begin with. That is the work that comes in from Cheney, and it is what we are set up to handle.
We cover residential and commercial heating and cooling across the town and the surrounding area. When a property manager needs a unit back online before a tenant calls again, or a homeowner is dealing with a furnace that has been short-cycling all week, the call reaches someone who can scope the job on the phone and get the visit confirmed.
Call us at (509) 356-3265 and we will take it from there.
We handle the full range of heating and cooling work, available every day from 5:30 AM to 9:00 PM.
Cheney has a lot of housing stock that has been around for a while. Older homes often carry equipment that is well past the age where a repair is the obvious answer, and additions or converted spaces where the ductwork never properly reached are common. A room that runs ten degrees colder than the rest of the house, a furnace that was installed before the current owners moved in, a heat pump that nobody has had looked at in several years. These are the calls we take regularly.
Access is the first thing. A furnace in a tight utility closet, an air handler in a low crawlspace, or an outdoor condenser that has been partially blocked by years of growth around it all affect what the visit takes. None of those are reasons to pass on a job. They are reasons to scope it carefully on the phone before the visit is booked, so the person coming out knows what they are walking into.
A system that has not been maintained in several years is not a write-off, but it does need a thorough diagnostic before any repair scope is agreed. Coils that haven't been cleaned, filters that were changed infrequently, blower motors running with worn bearings, heat exchangers that have never been inspected. The visit covers all of it, and the findings are explained before any work is authorized.
HVAC pricing is driven by three things: what the fault turns out to be, what has to be reached to fix it, and whether a repair or a replacement is the more practical answer once the system has been checked. None of those can be settled before the diagnostic visit, which is why the quote is confirmed on the call and then finalized after the system is looked at.
A repair on a furnace igniter is a different scope from a heat exchanger replacement or a full system swap. A refrigerant leak in an accessible location costs less to address than one that requires pulling the evaporator coil. The age and condition of the equipment matters too. If a system is old enough that the repair cost approaches what a new unit would run, that comparison is part of the conversation before anything is authorized.
When you call, you get a rate for the diagnostic visit confirmed on the phone. The repair scope and the cost come after the system is checked. Ask what the visit covers and you will get a straight answer.
The visit starts with the symptoms the customer described on the call, and it moves through the system from there. Thermostat and control board, air handler and blower, coils, refrigerant charge, and the outdoor unit are all checked as the diagnostic warrants. Nothing is quoted for repair until the fault is identified and the cause is understood.
The person who answers the phone can walk through the symptoms with you, which means the technician who comes out already has a picture of what the system has been doing. That context shapes where the diagnostic starts. After the system is checked, the findings are explained in plain terms before any repair is agreed to. What failed, why it failed, what the repair involves, and what it will cost. That sequence does not change regardless of the job type.
Diagnosed properly. Explained clearly. Priced before the work.
A furnace that has run through several hard winters without a maintenance visit is carrying risk into the next one. A tune-up covers the heat exchanger, burners, ignition system, blower, and airflow path through the filter and ductwork. For an AC or heat pump, the visit includes coil cleaning, refrigerant pressure check, and inspection of the capacitor and contactor. The goal is to find what is wearing before it fails on the coldest or hottest day of the year. The HVAC work done properly, start to finish, is what keeps a system running reliably through the seasons it was built for.
A house where some rooms are comfortable and others run noticeably hotter or colder usually has a duct problem, a zoning issue, or a system that is not sized or balanced correctly for the layout. The diagnostic visit checks the equipment first, then evaluates the duct system if the equipment is performing correctly. Leaky ducts, undersized runs, and blocked registers are all common causes. Zoning and comfort-control systems are also worth discussing when a property has areas with genuinely different heating and cooling needs.
Weak airflow throughout the house, a system that runs but moves very little air, or a blower that is louder than it used to be all point toward the air handler. Blower motor bearings wear, capacitors fail, and wheel assemblies collect debris over time. A blower running at reduced capacity makes the whole system work harder and deliver less conditioning. The repair is straightforward once the fault is identified.
A heat pump that stops heating in cold weather, runs in a continuous defrost cycle, or produces noticeably less output than it should needs a proper diagnostic before any parts are ordered. The reversing valve, the defrost board, refrigerant charge, and the outdoor coil are all checked. Cold-climate heat pumps rated to operate at very low temperatures are an option worth discussing for properties that currently heat with a furnace and want to consolidate heating and cooling into one system.
A central AC that will not start is usually a capacitor, a contactor, a thermostat wiring fault, or a safety lockout triggered by a prior fault. Each of those requires a different fix, and the diagnostic identifies which one before anything is replaced. If the compressor has failed on an older system, the comparison between a compressor repair and a full replacement is part of the conversation.
A system that cools less effectively each season, develops ice on the lines, or runs constantly without reaching the set temperature is showing the pattern of a refrigerant leak. The diagnostic locates the leak, assesses the condition of the evaporator coil, and gives a repair scope before any refrigerant is added. Adding refrigerant without finding the leak is not a repair. We find it. We fix it. We test the airflow.
We are available every day from 5:30 AM to 9:00 PM, including weekends. When a property has no heat at all, that call is treated as urgent. The fault gets scoped on the phone, the schedule is checked, and the visit is confirmed as soon as the calendar allows. A furnace that quits on a cold night is not something to sit on.
For tenants in rental properties, we work with the property manager or landlord to coordinate access and timing. For businesses that have to stay open, the visit is scheduled around operational hours where the schedule allows. Commercial rooftop units are covered as well as residential equipment.
If you are managing a property remotely and cannot be on site, the visit can be arranged with whoever has access. The scope and the price are confirmed before the technician goes out, and findings are reported after the system is checked.
Call and we'll get your heat or AC back on. The parts people usually ask about are covered on our services page.
When you call, have the system type ready if you know it, the age of the equipment if it is visible on the unit, and a description of what the system is doing or not doing. Error codes on the thermostat or control panel are worth noting. The more detail you can give, the more accurately the visit can be scoped on the phone.
We confirm the rate for the diagnostic visit before anything is booked. The repair scope and cost come after the system is checked. You are not agreeing to a repair when you schedule the visit. You are agreeing to have the system looked at and the fault identified. The repair decision comes after that, with a price in front of you.
Call (509) 356-3265 any day from 5:30 AM to 9:00 PM. We'll take the details and get it scheduled.
We take care moving equipment through a home or building and treat the property with care throughout the visit. If you have specific concerns about flooring or finished surfaces, mention them when you call and we will note them for the technician.
Yes. Newer equipment benefits from maintenance because it catches installation issues, confirms the refrigerant charge is correct, and keeps the manufacturer's documentation current. rrent, and some manufacturers require documented maintenance to keep their coverage terms in good standing, so a tune-up on newer equipment costs less than a repair call later.
Rental properties near the university follow the same scheduling process as any other property. The scope and rate are confirmed on the phone, access is arranged with whoever is on site, and the visit is booked around what the schedule allows. Property managers handling multiple units can scope several jobs on a single call.
Yes. A system that has gone without maintenance for a long time needs a thorough diagnostic before any repair scope is agreed, but that is the normal starting point for any service call. The visit covers the heat exchanger, burners, blower, and controls, and the findings are explained before any work is authorized. If the system is old enough that repair no longer makes financial sense, that comparison is part of the conversation.
Yes. Property owners with multiple units can book service across several addresses on one call. We note the details for each property and confirm the scope and rate for each location before any visits are scheduled.
We cover Cheney and the surrounding communities in Spokane County, including rural and outlying properties. Access and equipment condition are scoped on the call before the visit is booked. If you are unsure whether your address falls within the service area, ask when you call and we will confirm it.
We cover Cheney and the surrounding area across Spokane County. Nearby communities we serve include Four Lakes, Medical Lake, Spangle, Airway Heights, and Spokane. If you are in the area and want to confirm coverage for your address, ask when you call.
The next step is a phone call and a few questions about what the system is doing.
Call Liberty Lake HVAC Company at (509) 356-3265 and we will take it from there.
Heat restored. Cooling dialed in. Comfort back.
We serve these towns nearby as well: Medical Lake, Airway Heights, Town and Country, Country Homes. The rest are on our area list.
We cover the full range of heating and cooling work for homes and businesses across Cheney and Spokane County. Whether the call is about a furnace that quit overnight, a heat pump that stopped keeping up with a cold snap, or a system that has been limping along for two seasons, we scope the job on the phone and give you a rate before anything is scheduled. The table below lays out what each service covers and who it fits best.
| HVAC Service | Scope of Work | Common Needs | Helpful Details |
|---|---|---|---|
| HVAC System Installation & ReplacementMost Popular |
| Homeowners replacing aging equipment or properties adding central heating and cooling for the first time | A system more than fifteen years old that needs a costly repair is often a better candidate for replacement. We scope both options on the same visit so you can compare. |
| Seasonal Maintenance & Tune-Ups |
| Homeowners and property managers who want to catch problems before a breakdown | A fall tune-up covers the heat exchanger, burners, ignition, and blower before the system is asked to carry a full heating load. A spring check covers the condenser coil and refrigerant charge before summer. |
| Heat Pump Repair & Service |
| Homes and light commercial buildings running a heat pump year-round | Heat pumps that struggle in cold weather often have a reversing valve or defrost issue rather than a refrigerant problem. The diagnostic covers both. |
Call for a quote and we will walk through the symptoms, scope what the visit covers, and give you a rate before anything is scheduled. (509) 356-3265
(509) 356-3265