When a furnace has run for fifteen or twenty years and starts showing its age, the decision to replace it rarely feels urgent until the first cold snap of the season. Homes in a town the size of Town and Country tend to carry older equipment, and additions or finished spaces that were never properly connected to the original ductwork are common. Planning a replacement or an upgrade before the system forces the issue is the better path, and that conversation starts with a call. We cover the full range of residential heating and cooling work in Town and Country, from a single repair call to a complete system replacement, and we are available every day from 5:30 AM to 9:00 PM.
Whether a homeowner is weighing a new furnace before winter, a landlord needs a rental unit brought up to working order, or a property needs a cold-climate heat pump installed to handle both seasons, we handle the scope on the phone first. We cover Town and Country and the surrounding area in Spokane County, and the process is the same for every job: the details get confirmed on the call, the price is set before anything is scheduled, and the work is done properly, start to finish.
When a system stops heating or cooling entirely, that call goes to the front of the line. A no-heat situation in the middle of a regional winter is not a problem that waits, and we take urgent calls within our daily hours of 5:30 AM to 9:00 PM, including weekends. The fault gets scoped on the phone before the visit is booked, so the person coming out already knows what they are walking into.
For properties with tenants or businesses that cannot go dark, we work around the constraints. That means confirming access, timing, and what the visit will cover before anything is set in motion. The goal is to get the system back online with as little disruption as possible, and the planning for that starts on the call.
Appointments are arranged the same way for every job type. You call, describe what the system is doing, and we confirm the scope and the rate before anything is scheduled. There are no forms and no automated menus.
Call (509) 356-3265 and we will get it on the calendar.
A ductless mini-split is the answer when a space needs conditioning but has no practical path for ductwork. Finished garages, converted attics, additions built onto older homes, and rooms that have always run too hot or too cold are the situations where a mini-split does what a central system cannot. The indoor head mounts on the wall or ceiling, the line set runs to the outdoor unit, and the space gets its own temperature control without touching the existing duct system.
For a home that heats with a gas furnace and has no central air, a mini-split can add cooling to a specific zone without a full central AC installation. That is a practical option when the ductwork is not sized for cooling or when only part of the house actually needs it.
A single outdoor unit can support multiple indoor heads, each controlled independently. That setup works well for a home where different rooms run at different temperatures, or for a commercial space where one thermostat cannot serve the whole floor. Zoning through a ductless system gives each area its own control without the pressure imbalances that come from damper-based zoning on a central system. We handle both single-zone and multi-zone ductless installations across Town and Country and the surrounding area.
HVAC pricing is not a flat number, and a quote that does not account for what the system is doing is not a useful one. The fault that turned up on the diagnostic, the access involved in reaching the component, and whether a repair makes financial sense against the age and condition of the equipment are the things that move the number. A capacitor replacement on a well-maintained system and a heat exchanger fault on a furnace approaching the end of its life are different conversations with different outcomes.
We confirm the rate before any work begins. That means the diagnostic visit happens first, the findings are explained, and the repair or replacement cost is given before anything is authorized. If the system turns out to need more than the initial call suggested, that is part of the conversation before the scope changes. You are not handed a number after the fact.
Energy-bill concerns are treated as a diagnostic clue. A system that has been running harder than it should often shows up on the utility bill before anything else goes wrong, and that pattern helps point the diagnostic in the right direction.
Call (509) 356-3265 for a quote and we will walk through what the visit covers.
Forced-air heating pulls moisture out of the indoor air, and in a region with long heating seasons, that dryness accumulates. A whole-home humidifier connects directly to the furnace or air handler and conditions the air as it moves through the ductwork, treating the whole house rather than one room at a time. The installation involves connecting to the plenum, running a water supply line, and wiring the humidistat to the system controls. It is a straightforward addition to an existing forced-air system and one that makes a measurable difference through the coldest months.
A banging, rattling, or grinding sound from a furnace or air handler is the system pointing at something specific. A loose blower wheel, a failing motor bearing, a cracked heat exchanger, or debris in the cabinet each produce a distinct pattern. The diagnostic covers the most likely causes based on where the sound is coming from and when it occurs in the cycle. Catching a mechanical fault early usually means a repair rather than a full replacement.
The blower motor is what moves conditioned air through the ductwork, and a motor that is running slow, drawing too much current, or failing intermittently affects every room in the house. An air handler visit covers the motor, the wheel, the capacitor, and the belt on older systems. Airflow problems that look like a duct issue often trace back to the air handler, and the diagnostic checks both before a scope is given.
A heat pump that is not heating in cold weather may be dealing with a defrost cycle fault, a refrigerant issue, or a reversing valve problem. The defrost cycle is what keeps the outdoor coil from icing over in low temperatures, and a system that cannot complete it will lose heating capacity quickly. Repair calls cover the defrost board, the outdoor temperature and pressure sensors, the reversing valve, and the refrigerant circuit. We find it. We fix it. We test the airflow.
Uneven temperatures from room to room are one of the most common comfort complaints in older homes, and the cause is not always the equipment. Registers that were never balanced for the duct layout, dampers that have shifted, or a return air path that is undersized for the system can all produce the same symptom. An uneven house is a symptom, and it gets treated as one. Register rebalancing and ductwork evaluation are part of the diagnostic process when airflow distribution is the presenting problem. If you want the longer version, it is on our services page.
A forced-air system moves a lot of air through the home every day, and what that air carries matters. Standard filters catch larger particles but do not address finer dust, allergens, or biological matter that circulates through the duct system. A whole-home air filtration or purification system mounts in the air handler and treats the air at the source, which means every room in the house benefits rather than just the one with a portable unit in it.
Humidity is the other side of indoor air quality in this region. When the furnace runs for months at a stretch, indoor humidity drops to the point where it affects how the air feels at a given temperature, how wood floors and trim behave, and how comfortable the house is to sleep in. A whole-home humidifier addresses that directly and works in the background without any day-to-day management. Both filtration and humidity control are add-ons to an existing system, and both are scoped and priced on the call before anything is scheduled.
It depends on the size of the addition and how the existing ductwork is laid out. A small addition that shares a return air path with the main house may condition adequately from the existing system, but a larger finished space often needs either a duct extension or a dedicated ductless unit to hold temperature. The right answer comes out of a diagnostic visit where the existing system and the new space are evaluated together.
Call (509) 356-3265 and we will scope it on the call.
Yes. Maintenance visits are available across the same area we cover for repair and installation work. When you call from a more distant address, we confirm coverage and schedule the visit the same way we would for any other location.
It does. The more you can tell us about what the system is doing, when the problem started, and what has changed recently, the more accurately we can scope the visit and give you a rate before it is booked. A detailed description on the call also helps us arrive with the right focus.
It depends on the scope of the work and the layout of the unit. For a straightforward replacement where the equipment is accessible without disrupting the living space significantly, it is often manageable. We discuss the logistics on the call and advise on whether the tenant needs to be present, absent, or simply informed.
Modern cold-climate heat pumps are rated to operate efficiently down to around -15 degrees Fahrenheit, which covers the temperature range this region sees in most winters. Whether a heat pump is the right replacement for a particular home depends on the insulation level, the existing duct system, and the size of the space being heated. In some cases a dual-fuel setup, where the heat pump handles most of the load and a furnace handles the coldest days, is the more practical answer. We scope those conversations on the call and give a straight answer about what makes sense for the property.
If the diagnostic turns up something beyond what the initial call covered, the additional scope and the cost are explained before any further work is authorized. Nothing is added to the job without a conversation first. The rate for the original visit is confirmed on the call when the appointment is booked, and any change to that scope is a separate decision you make with the full picture in front of you.
Not always. Existing ductwork is evaluated as part of the replacement scope, and if it is in good condition and sized appropriately for the new equipment, it can stay in place. If there are leaks, restrictions, or sections that are undersized for the new system, we address those as part of the job and explain what is needed before any work begins.
Urgent calls are answered every day from 5:30 AM to 9:00 PM.
If a furnace stops heating, an AC fails during a warm stretch, or a heat pump goes down, call (509) 356-3265 and the visit gets prioritized based on what the schedule allows.
We cover Town and Country, Country Homes, Fairwood, Spokane, Mead, Millwood, and the surrounding area in Spokane County.
Call Liberty Lake HVAC Company at (509) 356-3265 and we will confirm coverage for your address and get the job moving.
Neighboring areas in range: Country Homes, Fairwood, Mead, Airway Heights. See the whole of our area list.
We cover the full range of heating and cooling work for homes and businesses across Town and Country and Spokane County. Whether the call is about a furnace that quit overnight, a heat pump that stopped keeping up with a cold snap, or a system that has been limping along for two seasons, we scope the job on the phone and give you a rate before anything is scheduled. The table below lays out what each service covers and who it fits best.
| HVAC Service | Scope of Work | Common Needs | Helpful Details |
|---|---|---|---|
| HVAC System Installation & ReplacementMost Popular |
| Homeowners replacing aging equipment or properties adding central heating and cooling for the first time | A system more than fifteen years old that needs a costly repair is often a better candidate for replacement. We scope both options on the same visit so you can compare. |
| Furnace Maintenance & Tune-Up |
| Households heading into a Town and Country winter who want the furnace checked before it is needed most | A tune-up before the heating season is the call that prevents a no-heat emergency in January. Energy-bill concerns raised on the call are treated as a diagnostic clue, not a side note. |
| Boiler & Hydronic Heating Service |
| Homes and buildings with radiant or baseboard hot-water heating systems | Boiler issues often show up as uneven heat across zones or a system that runs but does not deliver warmth to certain areas. The diagnostic covers the full hydronic loop. |
Call for a quote and we will walk through the symptoms, scope what the visit covers, and give you a rate before anything is scheduled. (509) 356-3265
(509) 356-3265